This article explains how to setup the Linksys RE6500 Setup. Turn your Linksys AC 1200 router on. Choose Wifi settings from the drop-down list. Set up your Linksys RE6550 Extender setup. Then, log into your Linksys Extender setup.
| How to Reset Wireless routers With Linksys Re6500 Firmware Update
This article explains how to setup the Linksys RE6500 router. Turn your Linksys AC 1200 router on. Choose Wifi settings from the drop-down list. Set up your Linksys RE6500 Extender setup. Then, log into your Linksys Extender setup.
The Linksys RE6500 wireless router supports WEP (Wireless Equivalent of Wired Ethernet) and USB cards for establishing a wired Ethernet connection to the modem. It is also possible to configure a wireless connection using a cellular phone or PDA phone as an alternative to the Linksys router. In this case, you have to install the necessary software on your cellular phone or PDA. You can connect your SID and the modem through WEP or USB ports respectively.
In the Linksys RE 6550 setup, you can click on the "Spot Finder" icon to start scanning for available wireless connections. After detecting all the known devices, you will be asked to choose the SSID (string) that is connected to this device. You may use a space or custom name for the SSID. If you have already set up the device as a wireless router, you will have to select "scan." In this case, you may use the "unchanged" search criteria in order to look for wireless connections.
After scanning the SSID, the Linksys RE Installer will prompt you to choose a network and confirm that you want to connect this device to that network. If you have already set up the Linksys router, you may use the usual method of connecting this device to a network. However, if you have not done so yet, you will have to connect this device to the internet using the browser on your cellular phone or PDA. When you are prompted to scan for available networks, the Spot Finder icon will turn red. This means that there is another network in the area that also connects to the Linksys wifi router.
You will have to allow the device to connect to the internet. After it has successfully connected to the internet, you should check whether the lights on the device to turn on. If they do, you can proceed with the Linksys Re6500 Extender Setup. Otherwise, you may find that your cellular phones or PDA are not detected by the extenders.
After connecting to the internet, you will find that the Spot Finder has detected another network. This time, it is a wireless network. You will need an ethernet cable to connect your computer to this wireless network. The Linksys Re6500 Setup should guide you to insert the ethernet cable into the adapter.
If you have connected your PDA to your computer, but are still having trouble finding an available network, you will need to perform the Linksys Re6500 Extender setup again. This time, you will plug the USB Ethernet port into the backside of the Linksys adapter. Then, you should plug the usb ethernet cable into the backside of the device where the wireless network is detected. Finally, turn the pad on and set it to connect to the internet. Usually, the LED lights on the device should flash green.
After these steps have been completed, restart the Linksys Re6500 router and set the wireless settings. You can now access the internet using your plan as if it was connected to the internet directly. You should also set the default settings in your extender setup, which are given in the system tools or WAP. You can change these values if necessary.
Now that you have tested your PDA successfully in a bridged mode, it is time to run through some basic troubleshooting tips for a Linksys router setup. For one thing, try to determine why your connection is not working. Look at the monitor and see if there is a signal zone on the page. If there is a signal zone, then the connection may be fine. In case the signal zone is non-existing, then you might have to set up your PDA in a different zone.
Now that you have configured your Linksys Extender Setup in a normal mode, you can proceed to connecting your PDA to a dual-band protected extender. You can follow the installation instructions given in the link given below. For help with Linksys wireless routers, you can use the link below.
Finally, reboot your PDA. Then, access the browser on your phone and go to the Linksys website. Follow the step-by-step installation instructions given on the site. Follow all the prompts, and after finishing the installation, connect your PDA to the Linksys re6500 extender firmware update USB port by inserting the update USB cable into the back of the device and plugging the device into the USB port. Follow the on-screen prompts to complete the setup.